Specifications

All specifications apply to all models unless noted otherwise.

MODEL OVERVIEW
  TBS1052B-EDU TBS1072B-EDU TBS1102B-EDU TBS1152B-EDU TBS1202B-EDU
Bandwidth 50 MHz 70 MHz 100 MHz 150 MHz 200 MHz
Channels 2 2 2 2 2
Sample rate on each channel 1.0 GS/s 1.0 GS/s 2.0 GS/s 2.0 GS/s 2.0 GS/s
Record length 2.5k points at all-time bases
VERTICAL SYSTEM – ANALOG CHANNELS
Vertical resolution
8 bits
Input sensitivity range
2 mV to 5 V/div on all models with calibrated fine adjustment
DC gain accuracy
±3%, from 10 mV/div to 5 V/div
Maximum input voltage
300 VRMS CAT II; derated at 20 dB/decade above 100 kHz to 13 Vp-p AC at 3 MHz and above
Offset range

2 mV to 200 mV/div: ±1.8 V

>200 mV to 5 V/div: ±45 V

Bandwidth limit
20 MHz
Input coupling
AC, DC, GND
Input impedance
1 MΩ in parallel with 20 pF
Vertical zoom
Vertically expand or compress a live or stopped waveform
HORIZONTAL SYSTEM — ANALOG CHANNELS
Time base range
2.5 ns to 50 s/div
Time base accuracy
50 ppm
Horizontal zoom
Horizontally expand or compress a live or stopped waveform
INPUT/OUTPUT PORTS
USB interface

USB host port on front panel supports USB flash drives

USB device port on back of instrument supports connection to PC

GPIB interface
Optional
DATA STORAGE
Nonvolatile storage
Reference waveform display
2.5K point reference waveforms
Waveform storage without USB flash drive
2.5K point
Maximum USB flash drive size
64 GB
Waveform storage with USB flash drive
96 or more reference waveforms per 8 MB
Setups without USB flash drive
10 front-panel setups
Setups with USB flash drive
4000 or more front-panel setups per 8 MB
Screen images with USB flash drive
128 or more screen images per 8 MB (the number of images depends on file format selected)
Save All with USB flash drive
12 or more Save All operations per 8 MB

A single Save All operation creates 3 to 9 files (setup, image, plus one file for each displayed waveform)

Course content

100 MB

ACQUISITION SYSTEM
Acquisition modes
Peak Detect
High-frequency and random glitch capture. Captures glitches as narrow as 12 ns (typical) at all time base settings from 5 μs/div to 50 s/div
Sample
Sample data only
Average
Waveform averaged, selectable: 4, 16, 64, 128
Single Sequence
Use the Single Sequence button to capture a single triggered acquisition sequence
Roll
At acquisition time base settings of >100 ms/div
TRIGGER SYSTEM
External trigger input
Included on all models
Trigger modes
Auto, Normal, Single Sequence
Trigger types
Edge (Rising/Falling)
Conventional level-driven trigger. Positive or negative slope on any channel. Coupling selections: AC, DC, Noise Reject, HF Reject, LF Reject
Video
Trigger on all lines or individual lines, odd/even or all fields from composite video, or broadcast standards (NTSC, PAL, SECAM)
Pulse Width (or Glitch)
Trigger on a pulse width less than, greater than, equal to, or not equal to, a selectable time limit ranging from 33 ns to 10 s
Trigger source
Two channel models: CH1, CH2, Ext, Ext/5, AC Line
Trigger view
Displays trigger signal while Trigger View button is depressed.
Trigger signal frequency readout
Provides a frequency readout of the trigger source.
WAVEFORM MEASUREMENTS
Cursors
Types
Amplitude, Time
Measurements
ΔT, 1/ΔT, ΔV
Automatic measurements

Period, Frequency, Pos Width, Neg Width, Rise Time, Fall Time, Maximum , Minimum , Peak-Peak, Mean, RMS, Cycle RMS, Cursor RMS, Phase, Pos Pulse Cnt, Neg Pulse Cnt, Rise Edge Cn, Fall Edge Cn, Pos Duty, Neg Duty, Amplitude, Cycle Mean, Cursor Mean, Burst Width, Pos Overshoot, Neg Overshoot, Area, Cycle Area, High, Low, Delay RR, Delay RF, Delay FR, Delay FF

WAVEFORM MATH
Arithmetic
Add, Subtract, Multiply
Math functions
FFT
FFT
Windows: Hanning, Flat Top, Rectangular
2048 sample points
Sources
Two channel models: CH1 - CH2, CH2 - CH1, CH1 + CH2, CH1 × CH2
AUTOSET MENU

Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems, with undo autoset.

Square wave
Single cycle, multicycle, rising or falling edge
Sine wave
Single cycle, multicycle, FFT spectrum
Video (NTSC, PAL, SECAM)
Field: All, Odd, or Even Line: All or Selectable Line Number
AUTORANGE
Automatically adjust vertical and/or horizontal oscilloscope settings when probe is moved from point to point, or when the signal exhibits large changes.
FREQUENCY COUNTER
Resolution
6 digits
Accuracy (typical)
+ 51 parts per million including all frequency reference errors and +1 count errors
Frequency range
AC coupled, 10 Hz minimum to rated bandwidth
Frequency counter signal source

Pulse width or edge selected trigger source

Frequency counter measures selected trigger source at all times in pulse width and edge mode, including when the oscilloscope acquisition is halted due to changes in run status, or acquisition of a single shot event has completed.

The frequency counter does not measure pulses that do not qualify as legitimate trigger events.

Pulse Width mode: Counts pulses of enough magnitude inside the 250 ms measurement window that qualify as triggerable events (e.g. all narrow pulses in a PWM pulse train if set to "<" mode and the limit is set to a relatively small number).

Edge Trigger mode: Counts all pulses of enough magnitude.

Channels
2 channel
DISPLAY SYSTEM
Interpolation
Sin (x)/x
Waveform styles
Dots, vectors
Persistence
Off, 1 s, 2 s, 5 s, infinite
Format
YT and XY
COURSEWARE SOFTWARE
System requirements

The following PC configuration represents the minimum requirements needed to install the Courseware software.

Operating System Windows XP, Windows 7, Windows 8, Linux (ubuntu 12.04, 12.10, 13.04 or fedora 18, 19)
RAM 512 Megabytes (MB)
Disk space 1 Gigabyte of available hard disk space
Display XVGA 1024×768 with 120 dpi font size recommended
Removable media CD-ROM or DVD drive
Peripherals Keyboard and Microsoft mouse or other compatible pointing device
PHYSICAL CHARACTERISTICS
Dimensions
  mm in.
Height 158.0 6.22
Width 326.3 12.85
Depth 124.2 4.89
Shipping dimensions
  mm in.
Height 266.7 10.5
Width 476.2 18.75
Depth 228.6 9.0
Weight
  kg lb.
Instrument only 2.0 4.3
...with accessories 2.2 4.9
RM2000B rackmount
  mm in
Width 482.6 19.0
Height 177.8 7.0
Depth 108.0 4.25
ENVIRONMENTAL
Temperature
Operating
0 to +50 ºC
Nonoperating
–40 to +71 ºC
Humidity
Operating and nonoperating

Up to 85% RH at or below +40 ºC

Up to 45% RH up to +50 ºC

Altitude
Operating and nonoperating
Up to 3,000 m (9,843 ft.)
Regulatory
Electromagnetic compatibility
Meets Directive 2004/108/EC, EN 61326-2-1 Class A; Australian EMC Framework
Safety
UL61010-1:2004, CSA22.2 No. 61010-1:2004, EN61010-1:2001, IEC61010-1:2001